Mold Prevention Tips for Your Commercial Property

5/14/2020 (Permalink)

Mold Prevention Tips for Your Commercial Property

Water damage in your commercial building does not just harm electronics. It could also lead to a buildup of mold.
Mold is found naturally in the environment, where it breaks down organic materials. It is even used to make penicillin and brie. However, mold inside your property can cause major damage to your floors and walls. To prevent this destruction, consider the below suggestions.
1. Keep the Building Dry
Mold needs moisture in order to grow. Any mold prevention plan, therefore, starts with limiting wetness in the building. If you notice a spill on the carpet or a leak from a pipe, dry the affected areas immediately. Any items that cannot be immediately dried should be removed from the premises within 48 hours.
2. Ventilate
It is not just water damage that causes mold growth. Even activities such as doing laundry or cooking can increase the moisture in a building. If your property has a kitchen or a laundry facility, make sure it is properly ventilated. You may also want to consider installing exhaust fans or dehumidifiers in highly wet areas.
3. Improve Air Flow
Did you know that air holds less moisture as it gets colder? Poor airflow could cause this excess moisture to settle onto the floors or walls. You should thus keep interior doors open and keep furniture away from the walls.
4. Check the Gutters
Clogged roof gutters could cause a water leak that leads to a mold problem. Inspect the gutters regularly and make sure they stay clean. You should also check for any water stains in the ceiling, as they could be evidence of leaks.
By limiting water damage to your Red Rock, GA, property, you can reduce the spread of mold. Still, even if you take the proper precautions, mold damage can occur. This is especially true after major water emergencies such as floods. If you do suspect that there is excess mold in your building, contact your local restoration and cleanup specialists.