Recent Mold Remediation Posts

3 Ways To Contain the Spread of Mold During Cleanup and Remediation

9/19/2019 (Permalink)

A drywall covered with plastic, this is used as a containment barrier to prevent the spread of contaminants Containment barriers in an Acworth, GA home

How To Contain the Spread of Mold in Your Home

Discovering the presence of mold in your Acworth, GA, home can be alarming. However, there are several different ways to deal with mold contamination, no matter its cause. One of the most important factors in permanently eradicating fungi can be preventing the spread of spores during mold cleanup, from the discovery of their presence to the final stages of remediation. Fortunately, there are a few different ways to ensure infestations do not spread.

Turn off Your HVAC System

Once you find mold damage, you can assume there are spores present in the air that can travel and attach themselves to moist areas, such as your bathroom shower or in a damp basement. To prevent the spread of spores, turn off your heating, ventilation and cooling system until professionals arrive and contain the problem areas. This can help prevent the rapid travel of mold spores to other areas of your home.

Block off the Area

Mold contamination can spread quickly, especially when people and pets enter the area and carry away spores on their clothing and fur. You can further mold remediation efforts by sealing off affected rooms; for example, if you are waiting for a black mold cleanup and removal service to arrive and assist you, block off entrances and shut doors and windows in the meantime to reduce the risk of further contamination.

Prevent Further Water Damage

If a mold infestation was caused by a water line or appliance leak, shut off the water supply to control the flooding. Mold spores are attracted to moisture and humidity, so the sooner you can prevent these conditions, the better. It is wise to locate your home’s water shutoff valves before a flooding incident occurs, as you can turn them off quickly when required.

Dealing with mold contamination in your Acworth, GA, home can be a daunting task. However, when you know how to contain the spread of mold spores before and during the remediation process, you can protect your property from future infestation.

3 Simple Steps for Preventing Commercial Mold Growth

7/26/2019 (Permalink)

Regularly wipe away moisture to keep mold from growing around the windows sill

Prevent Mold From Taking Hold At Your Commercial Property

"You know what this office needs? Some black mold," said nobody ever. If mold cleanup isn't part of your budget, follow these three steps to prevent mold from taking hold at your commercial property.

1. If things get wet, dry them ASAP. Mold loves moisture like your business loves turning a profit. In fact, it can't grow without it. To avoid a moisture problem in your building, make sure that wet areas and items such as basements and rugs are dealt with immediately and thoroughly.

Be proactive, too. After a heavy storm, for example, inspect the building's low-lying areas and drains. Regular check-ins under bathroom, break room, and utility sinks are a wise idea, too.

2. Air the building out. This is an especially important step if your property is subject to a lot of humidity, either due to your location or to the type of business performed there. Lack of ventilation helps black mold thrive, so be sure to vent any moisture-producing equipment, employ dehumidifiers and fans as needed, and, if nothing else, let some fresh air in regularly.

Monitoring your indoor humidity is a smart call, as well. According to the EPA, the humidity indoors should stay between 30% and 60%.

3. Perform regular inspections of your property. While mold-resistant building materials or paints can help reduce the odds of mold, it's virtually impossible to 100% mold-proof your commercial property. You can, however, monitor any areas that might be hospitable to mold.

In addition to checking in with plumbing fixtures, hoses, sewers, and any areas that have the potential to harbor moisture after a storm, keep an eye out for new clues. These might include telltale signs of moisture issues such as a water stain on the ceiling or persistent condensation on a window.

Black mold is insidious, but it's not inevitable. By proactively inspecting your commercial property in Lost Mountain,GA, and keeping it dry and well-ventilated, you can significantly reduce your odds of requiring the skilled help of experienced mold removal specialists.

Why Does Mold Keep Coming Back?

5/23/2019 (Permalink)

Mold spores thrive on moisture

Mold Cleanup

For many homeowners, bleach is the go-to chemical when messes are tough to treat. However, chlorine bleach is not the best tool for targeting black mold. There are several important reasons to pass up the bleach and take other steps for mold cleanup.

  • Bleach doesn't soak into porous surfaces, so it may kill mold on the surface, but doesn't penetrate to the roots of the mold. Wait a week or two and you'll see new growth.
  • Eventually, that surface bleach that was once effective, won't be. Chlorine evaporates, so all that's left is a moist surface. Old bottles of bleach are generally much less potent because of this.
  • The fumes from bleach are harmful to the environment, including your family and pets.

The fact is that mold exists naturally and is found everywhere. It plays a vital role in the decay process and is instrumental in the creation of cheese and penicillin. Why does it keep showing up in your home?

One: There Are Plenty of Suitable Environments

Mold requires a bit of moisture and some organic matter, and that's it. Of course, there are plenty of locations throughout the home that satisfy these requirements. Look in out-of-the-way places in bedrooms, bathrooms, the kitchen, the laundry room, crawlspaces, the attic, in the pipes or ducts, around the windows, and under the sink.

Two: Mold Is Always There

Whether they drift in on a spring breeze or get carried in on your clothing, mold spores are easily transported from one place to another. You may work very hard to clean up one spot only to find new black mold growth somewhere else in the home. Mold remediation professionals conduct thorough tests to located hidden clusters of mold and to identify potential breeding grounds. Without these efforts, new spores could take hold.

Although black mold exists everywhere, it can be managed. If you take adequate steps of prevention and contact professionals at the first sign of trouble, you can keep your Macland,GA, home safe and clear.

How Do You Know if Mold Is Growing in Your Business?

4/9/2019 (Permalink)

Mold can vary in color and may appear white, gray, green or black

Is Mold Growing in Your Business?

Mold is a common issue that can cause widespread problems. It’s often useful to know the signs that may indicate mold is present in your building in Macland, GA, and to know when to contact an indoor environmental specialist.

1. Visible Signs

There are often visible indicators that mold is present in a building. Though discoloration can occur on some items as a result of water damage, mold growth frequently occurs on surfaces that are damp and can also cause discoloration on walls, carpets, and ceilings. Mold can vary in color and may appear white, gray, green or black. The texture of mold also tends to vary depending on the type of mold and the material on which it is growing and can be either smooth or fuzzy.

2. Musty Odor

Discoloration isn’t the only sign that mold may be growing in your business. Mold often has a musty odor, a result of a compound called mycotoxin that occurs as a result of the growth. If there are no discolored areas noticeable near the area where the odor is present, it’s possible that the mold could be growing in areas that aren’t easy to see, such as in air ducts or on drywall.

3. Specialized Tests

Often, an indoor environmental specialist is needed when there are no noticeable signs of mold in a building. Specialists can assist in identifying the type and location of mold that is present. A mold test can provide professionals in mold remediation with information about the number of spores that are present. Additionally, these specialized tests are also useful after remediation has occurred, as the tests can tell experts if there are other potential sites of growth or if remediation was successful.

Though mold is sometimes visible or has a musty odor, there may be no initial indicators of its presence. An indoor environmental specialist can perform specific tests to check for the presence of mold. Overall, it can be incredibly beneficial to quickly identify the growth, since this can result in a timely, inexpensive remediation process.

Dealing With Mold Damage Properly in Your Acworth Home

12/26/2018 (Permalink)

Microbes can spread quickly. Help control the process by calling in SERVPRO technicians.

SERVPRO can Help Prevent the Spread of Mold on Your Property

A variety of situations can arise when you come across mold, bacteria, or fungi growing in your home, many of which have the opportunity to cause health effects for you or your loved ones.
Finding mold damage in your Acworth area home is not the end of the world. Homeowners experience these issues quite often and seek professional help to mitigate the damages they experience in their homes.
SERVPRO technicians are expertly trained to handle mold and other microbial growth issues in your home. Microbes are living organisms that often have an effect on the quality of our indoor environment. Some types can contaminate the air that we breathe or the water that we drink. However, microbes are also a vital part of the ecosystem and a necessity of life.
Mold and other fungi are multicellular organisms that digest materials found within their surroundings to obtain nutrients rather than eating like animals, or making food like plants. Bacteria live in soil, water, and other organic materials. Like fungi, bacteria also absorb surrounding materials. However, bacteria are usually single-celled organisms.
At SERVPRO we help control microbial growth by removing moisture sources needed for the organisms to spread and remove contaminated materials from your home. When focusing on quick drying procedures, some chemicals may be necessary to control growth or prevent further contamination.
SERVPRO technicians only use EPA-registered broad spectrum disinfectants in the right mixture and dwell time according to product labeling. We use specific equipment to maintain the correct temperature and pH levels to rectify the situation while also making sure to protect our workers and the occupants of your home properly throughout the process.
Without the proper knowledge and experience, it is entirely possible for you to spread the contamination further, infecting additional areas of your home and adding to the issue rather than fixing it. Attempting this type of remediation on your own is highly questionable, especially if the area is larger than 10 square feet.
While the use of disinfectants like bleach alone is highly ineffective for mold remediation, anyone attempting to perform this job should concentrate on physical removal of contaminated porous materials and efficiently dry the area to avoid microbes returning within days.
Make sure to contact SERVPRO of Northwest Cobb County immediately after discovering mold damage on your property. We can help. (770) 966-1442

How Do Ice Dams Result In Mold Damage?

11/26/2018 (Permalink)

Ice dams in Los Mountain,GA

An ice dam results from uneven temperatures on a roof. Snow melts and refreezes at the eaves, preventing additional snow melt from draining off of the roof. Find out more about the causes of ice dams and how these formations can result in water damage.

How Do Ice Dams Form?

Ice dams are more likely to form if a roof has uneven temperature levels. A dam results from:

  • Warmer temperatures higher on the roof
  • Cooler temperatures lower on the roof
  • Insufficient drainage

If snow melts, runs down the roof, and refreezes, water can pool behind the dam of ice. Standing water may damage roofing materials and lead to leaks.

What Causes Uneven Roof Temperatures?

Warm air can rise through the ceiling toward insulation and the roof surface. Heat may transfer from the:

  • Ceiling to insulation through conduction
  • Insulation to roof sheathing through convection
  • Insulation to the surface of the roof through radiation
  • Heated interior toward the roof through air leakage
  • Chimney to the roof surface
  • Exhaust system to the roof surface

Any of these causes, or solar heat gain, can result in an ice dam. Property owners should take measures to maintain a uniform roof temperature.

How Can You Prevent Dams and Damage?

There are several ways to prevent ice dams. A building owner may:

  • Remove snow with a roof rake or push broom
  • Ensure ceilings are airtight
  • Increase insulation between the ceiling and the roof
  • Ventilate the roof

All of these methods reduce the likelihood that ice will form a dam. Removing snow is a temporary fix. The other methods can address the issues that cause ice dams.

Mold may start to grow in just 24 hours after a leak. Discard water-damaged insulation to prevent black mold. If an ice dam results in damage to a commercial building in Lost Mountain,GA, contact water damage mitigation and mold cleanup professionals.

3 Types of Mold You Might Find in Your Home

9/18/2018 (Permalink)

Closet with mold in Acworth, GA

There are many ways you might protect your Acworth, GA, home, from putting in a security system to modifying your homeowner’s insurance to include a wider variety of coverage. However, some dangers are not always apparent and can take hold before you discover their presence, such as mold growth. Different types of mold can grow out of sight and become troublesome, so being able to spot and identify different types can help you target mold before it damages your home.

1. Cladosporium

This type of mold growth can be found on a variety of surfaces, including carpeting, paper and wood. It may appear greenish-brown or dark green. You will probably find this type of mold in your attic or in places with high humidity, such as under a bathroom or kitchen cabinet. It may grow rapidly during humid weather as well.

2. Penicillium

Not all types of mold thrive in humid environments, and penicillium is one such strain. This mold grows in cooler to moderate temperatures and can often be found growing on spoiled food in your fridge or on your countertop. This is the type of mold that grows on bread when it sits too long. You can identify it by its white or light green color.

3. Stachybotrys Atra

This mold commonly grows after your home suffers water damage. Also known as black mold because of its telltale color, stachybotrys atra can spread quickly and may be difficult to remove without the help of a mold damage and remediation service. If this mold is growing on a water-damaged wall, it may also have made itself at home in the wall’s interior as well, so it is a good idea to have the area inspected by mold removal specialists.

When mold invades your Acworth, GA, home, it can be difficult to know how it might affect the structure. However, knowing how to identify different types of mold growth may help you decide how to move ahead with cleanup efforts.

Why Does Bread Always Get Moldy?

5/14/2018 (Permalink)

Mold is more likely to grow in wet places than in dry ones.

Everyone knows the feeling of opening the fridge to make a sandwich, reaching into the bag of bread, and coming into contact with disgusting, fuzzy mold growths presaged by that smell that always seems to accompany moldy bread. Why does food mold, anyway, and why is bread more likely to mold more quickly than anything else? Read on for answers to your Acworth, GA, mold problems and culinary woes.

You Can’t Escape Mold

Believe it or not, mold is everywhere. In the air, on your skin, in your food. It’s just a matter of the conditions necessary for it to grow. Bread in particular is appetizing to the mold because of the yeast in it. You can prevent mold on bread by:

• Storing it in a cool, dry place
• Wrapping it properly
• Always checking it for freshness on purchase
• Only keep small amounts of bread rather than storing it in the long term

Remember that if you find mold on one or two slices of bread, the entire loaf is probably infested with bread mold and just hasn’t begun to sprout.

Refrigerating Bread Actually Makes Mold Grow Faster

Mold is more likely to grow in wet places than in dry ones. When you refrigerate your bread, especially in the plastic bag it usually comes from, the bread “sweats” the moisture inside it only for that moisture to condense against the walls of the bag. That trapped, wet environment is the perfect situation for bread mold to take place and grow.

It’s Not Just Bread

Fridge mold can happen to anyone, but it’s also a sign something may be wrong with your refrigerator. If your fridge isn’t cooling properly, it may go through cycles of hot and cold that lead to condensation on the inner walls. That condensation results in a moist environment that mold loves – with plenty of food to grow on with your fresh groceries ripe and waiting. If you’re having frequent bread mold problems, it’s a definite sign you need to get your get your fridge checked out. For more information, visit

3 Steps for Preventing Mold Growth in Your Company’s Breakroom Fridge

4/26/2018 (Permalink)

You may have areas of your Acworth, GA, commercial building that are not always easy to keep clean, such as the employee break room. Crumbs, spills and discarded trash might be common problems, but few are as difficult as how to keep the employee fridge clean. Abandoned or forgotten food can contribute to fridge mold, which is both unpleasant and tough to clean; however, there are a few steps you and your workers can take to banish food fungi for good.

1. Remove All Items

Before you can properly clean the breakroom fridge, it is a good idea to empty it completely to ensure no moldy food is left behind and that all shelving is visible. Do not allow moldy food or discarded containers to sit in the breakroom trash, as this may cause the spread of mold spores. Remove these items to your company’s outdoor dumpster.

2. Check for Moisture Issues

Once the fridge is empty, it is a good idea to unplug it and check for excess water or moisture. This may also help defrost any ice that was formed near the top shelves. If your fridge has a built-in water filter or ice maker, you may want to have the lines looked at by a qualified water damage and restoration company to ensure there are no leaks that may be contributing to any unpleasant mold smell.

3. Avoid Water-Based Cleansers

Using water-based cleansers, such as bleach, may leave behind moisture that can contribute to new fridge mold. Instead, dilute a small amount of dish soap with a dollop of distilled water on a clean cloth and wipe down all the shelves and drawers with it. Treat stubborn stains with a baking soda paste and then wipe all the shelves dry before you turn the fridge back on.

Disinfecting a fridge on a regular basis can prevent mold from spreading in your Acworth, GA, company’s break room. Whether you have 12 employees or 12 dozen, taking steps to eliminate fridge mold can benefit everyone. For more information, visit

Beginner's Guide to Mold Containment

3/26/2018 (Permalink)

When you find mold in your Acworth, GA home, you need to address the problem as quickly as possible. Mold spores can spread through air vents and on clothes to the far corners of your house. To slow down the spread of mold contamination, you need to find ways to contain the growth. Residential mold remediation specialists often know how to setup the proper containment system for your problem. Here is a quick run down of the potential containment options that could be used on your home:

• Negative air chambers
• Plastic barriers
• HEPA filters

Some mold issues may require a combination of these options.

Stop Air Flow

If air is able to leave the contaminated space in any direction, spores can also escape. One of the first goals of containment is to stop air from being able to leave the area riddled with mold contamination. Professionals may set up physical barriers to help eliminate the escape routes for the fungus. The experts could either put up plastic barriers or simply close doors and tape off the seams. They will also likely want to stop HVAC systems from running and turn off the accompanying fans. This will give more control over the air leaving the space.

Pull Air From the Space

Once the area has been cut off from the rest of the house, the contaminated air has to be sucked out. HEPA vacuums with filters can help pull out the air and catch the unwanted and unsafe particles within. This creates a negative air chamber and helps isolate the spores. As the actual cleanup process starts, more spores may be sent up into the air, so it is important that the HEPA vacuum keeps getting used.

Keep Barriers in Place

Once the cleanup seems to be underway, it may be tempting to remove the barriers for easier access. However, it is important to remember that mold contamination can spread quickly. Keeping the barriers in place until the cleanup is done is often the best solution. Visit for more information on mold. 

How To Curb Mold Growth in the Break Room Fridge

2/22/2018 (Permalink)

Giving your employees a place to store homemade lunches may seem like an innocent thing until you open the fridge one Monday morning only to discover someone's forgotten lunch has started growing fungus. This type of fridge mold usually does not spread to other parts of the office, but it can result in a pungent mold smell. You should not have to worry about disinfecting the fridge after every weekend. Instead, use these tips to stop mold from growing in your Acworth, Georgia, company's break room fridge before it even starts.

Set Strict Guidelines

Let your employees know exactly how the fridge can and cannot be used. This will ensure everyone plays a role in keeping the unit free of mold. You may want to enforce certain guidelines, such as the following:

• Food cannot stay in the fridge over the weekend.
• Any food left in the refrigerator over the weekend is subject to being thrown away.
• All lunches must be labeled with names.
• Community food can only remain in the fridge for two days.
• Unless given special permission, the fridge is only for food items.

You can create rules that fit your business to ensure everyone can have a positive experience in the break room.

Schedule a Regular Cleaning

Getting your break room refrigerator cleaned every week is a great way to stave off fridge mold. Many Monday through Friday businesses find it is beneficial to have the cleaning services done late Friday or Saturday. If your company is open seven days a week, you can simply schedule the cleaning after business hours. Not only will the regular cleaning help you make sure food does not stay in the fridge too long, but it can also help keep your unit sanitary.

If fridge mold becomes too big of a problem, you may have to call in mold remediation specialists. Whether you are sick of disinfecting the fridge or cannot stand the mold smell anymore, it is not too late to let a professional look at your fungus problem.

For more information on mold visit us at

What to Expect with Mold Remediation

12/2/2017 (Permalink)

What to Expect with Mold Remediation

Discovering black mold growing in your home in Acworth, GA is a homeowner’s worst nightmare. Some homeowners wonder what the best step to take is, or how to remove the mold or stop it from growing. Many don’t realize that in order to remove the mold and stop it from coming back, you will need to hire a restoration professional.  Here are a few things you should expect from a restoration professional concerning mold remediation.

Mold “Removal” is Impossible

Don’t believe sensational claims from disaster restoration companies claiming they will eradicate all traces of mold from your home. Microscopic mold spores exist in some state or another nearly everywhere, indoors or outdoors. Mold floats through the air and can enter your home through an open door or window, your HVAC, or even on the back of one of your pets.

Mold Remediation

Just because mold removal is impossible by definition doesn’t mean your home can’t be treated for black mold growth. Mold remediation is a process that will restore your home to the natural, healthy levels of mold that exist everywhere. This begins first by inspecting the property for visible signs of black mold or other kinds of mold, as well as excess moisture. Since mold thrives on moist environments, it’s likely to grow in those kinds of areas. Once the affected areas are found, professionals will begin the mold cleanup process by way of negative air pressure and other high-tech methods.

Air Filtration and Odor Removal

One of the most important parts of mold remediation comes after the visible signs are gone. Often, mold can leave behind an odor or toxic fumes even after being removed. Restoration professionals will begin an air filtration process using “air scrubbers” and HEPA vacuums to prevent the spread of mold spores and odor. If your personal belongings are heavily affected, they may also need to be removed. Visit for more information on mold.

Why Is Mold Growing in My House?

12/2/2017 (Permalink)

Why Is Mold Growing in My House?

When mold strikes in Acworth, GA there are a few usual suspects you should investigate. Most of the time, black mold is the result of a moisture problem. Getting mold cleanup performed as early as possible might help you avoid:

Costly teardowns
Extensive infestation
Associated water damage

Here are a few reasons mold grows, along with what you might be able to do to stop it in the future.

Busted Pipes

Water is the primary ingredient in a moldy situation. Plumbing is often one of the last things homeowners want to replace, and that means older homes, in particular, are susceptible to this black mold risk factor. Another thing to note about plumbing is most of it is hidden in the walls. Keep an eye on your water bills; increased costs— without raised rates or higher water usage— could indicate a leak.

Drainage Issues

An intact roof and a functioning gutter system are both necessary for proper drainage. You might also have other water control features in your home, such as sump pumps, ditches or engineered runoff control. Keeping everything updated and clean makes a big difference in your overall mold risk. However, nearby construction or unexpected levels of rainfall might lead to temporary leaks or minor overflow even if everything's working perfectly with your own property.

High Humidity

Black mold typically needs a lot of water to grow, but sometimes, all it takes is a humid environment. Make sure you have proper ventilation in humid areas:

Laundry areas

If one of your rooms feels muggy or clammy all the time, this might be a cause of mold.

Mold cleanup performed by the right professionals can often make your home feel like new, but the best way to deal with mold is to stop it before it starts. Controlling a moisture problem may also prevent the reappearance of a mold infestation after a thorough cleanup is performed. Visit for more information on mold.

Services Included in Mold Damage Restoration

8/31/2017 (Permalink)

Services Included in Mold Damage Restoration

If you have suffered from mold damage, you may be wondering what exactly a restoration company can do for you. In these harsh economic times, you want to ensure that the restoration company you hire for mold removal gives you value for money. In this regard, the restoration company should have the ability to offer both remediation and mitigation services to prevent mold growth in the future. They should have the necessary experience to deal with black mold and stop the dry rot in its track. Knowing what to expect can help you have peace of mind when you have mold in home.

Understanding of mold damage

The restoration company you call for remediation services should be knowledgeable in the field. You want professionals that can identify the various species of fungus and mildew. They should possess the know-how needed to deal with the smelly odor associated with a black mold infestation. To prevent future mold in home attacks, the mold damage experts should also know some of the mitigation steps needed.

Possession of equipment

The process of mold removal requires certain types of specialized equipment. If you are not a mold removal expert yourself, you may not have the need to purchase machinery that specializes in detecting mold in the home. However, the mold damage experts need these machines to increase the efficiency of mold removal. The remediation equipment should be capable of detecting the fungus or mildew wherever it may be in the home. When combined with experienced mold growth professionals, the equipment can be able to identify mold growth behind the wall. This can be a difficult area to reach in the search of mold in the home.

Cleaning agents

One of the most effective mitigation steps against mold damage is a proper cleanup. The mold growth experts know that once the mold has been removed, a cleanup offers good chances of catching the microscopic elements of the fungus or mildew that may still be left. It is important to ensure that the cleaning agent not only removes the fungus and mildew, but that it also kills them completely. This helps to prevent future mold growth. Deodorization is also important at this stage to remove the smelly odor caused by black mold. The chemicals used for deodorization should be environmentally friendly but also effective. You do not want a lingering smelly odor that remains even after all the black mold has been removed. Nevertheless, the deodorization agents should not cause further damage in addition to the losses you have suffered from the commercial mold damage. It should not damage the furniture or walls in your home.


After undergoing commercial mold damage, you want professionals that can remove the dry rot within the shortest time possible. Exposure to the dry rot can result in the smelly odor spreading to cover larger areas. Commercial mold damage may also result in the decline in the value of property. Thus, you need professionals that can handle the dry rot within a short time. If you call them, they should dispatch a commercial mold damage professional immediately to carry out an inspection. Once the remediation experts begin work on removing mold growth behind the wall, they should give you a timeline. This outlines the processes and steps in getting rid of the mold growth behind the wall. After cleaning the mold growth behind the wall, the experts should give you mitigation steps to be implemented immediately. You do not want to give the mold growth behind the wall any time to return.


From a review of the individual services, it is clear that the most important is professionalism. You need individuals that can do what they say they can do. This helps to give you peace of mind when working with them. For instance, if they say that you will not notice the smelly odor after deodorization then that should be the case. Ensure that you only work with a restoration company that is reputable and professional.
Visit for more information on mold.

Mold Damage Restoration & Remediation Services Available Throughout Acworth

6/14/2017 (Permalink)

Mold Remediation in an Acworth Home Is Not a Petri Dish Exercise

Care Inspection and Removal of Fungi Growths are Crucial to a Successful Mold Remediation

Warm, humid climates provide mold with the perfect environment, especially in your attic or basement where poor ventilation increases the chances of growth. Identifying actual mold growth in either of these two areas can be rough, requiring professional technicians to determine the extent of exposure in your home.
If you even think that mold damage may be a problem in your Acworth home, having a qualified mold remediation specialist perform an inspection can give you the peace of mind you warrant. Just make sure that the company you choose to use has the proper certifications and qualifications to perform the services you need.
A qualified mold remediation company, like SERVPRO, has technicians that take the time to instruct you on the proper way to avoid mold contamination from getting out of control in the future. It may just be a simple play on words to some, but we tend to stay away from terms such as removal or eliminate because there is no way for anyone to remove or eliminate mold from your home entirely. Mold spores are endemic in nature.
SERVPRO mold remediation specialists use a variety of methods to control mold growth found in your home. We dispose of saturated materials, clean and disinfect contaminated areas, all while controlling the environment using air movers, negative-airflow machines, and HEPA filtered vacuums to limit exposure for everyone involved.
SERVPRO technicians use personal protective equipment PPE such as gloves, boots, full-body suits, and masks to prevent mold spreading to other, clean areas of your home. By cordoning off the affected area and using clean rooms to enter and exit the contaminated areas, we prevent the spread further and make every effort to get things under control.
Watching mold remediation specialists can be a fantastic sight, the level of professionalism, care, and precision needed to maintain a well sealed clean zone takes quality training, understanding, and timing. We perform these services and more, for customers just like you, every day.
Call SERVPRO of Northwest Cobb County to receive the mold damage remediation services you deserve and return your home to a healthy, clean, safe environment that you and your family can enjoy, today. (770) 966-1442

Acworth is worth a visit.

Get Professional Remediation or Mold Damage Mitigation Services in Your Acworth Home Today

4/5/2017 (Permalink)

Mold gets handled using the correct safety procedures when you call SERVPRO to investigate an occurrence on your property.

SERVPRO Follows Proper Standards When Dealing with Mold

You have found a small patch of mold on your bathroom ceiling and cannot help but wonder how extensive the exposure is, or how much damage exists, but you are afraid to look. Performing a little research online, you get even more confused. People attempt to misinform you, making decisions even harder.
One of the most important things that most of the information concerning mold damage in your Acworth home involves getting the help you need as soon as possible. So, you turn to a local company, with national resources, IICRC certified training and someone who follows EPA standards for restoration.
At least, that is what you should have done, before deciding to attempt the repairs on your own. Now you find yourself knee deep in mold contaminated materials, have poor protection set up and continue to spread mold spores throughout your home on the way to make the phone call.
The Center for Disease Control (CDC) states in plain text on their website that the best way to address mold contamination situations in your home or business is to contact a quality restoration company for assistance. Companies, like SERVPRO, dedicate a massive amount of time, training, personnel, and equipment to making accommodations for homeowners.
SERVPRO technicians do not just come into your home, spray a bunch of chemicals around and leave. We have very severe contamination, transport and handling procedures developed to help get things under control quickly. Our team works tirelessly, restoring your home’s indoor air quality and the entire contaminated space into a healthy, safe, secure environment for you and your family to enjoy.
Using infrared water location devices, we start with locating and repairing the source of water causing the issue. After that, we physically remove all contaminated, unrestorable items and materials from your home, disposing of them according to EPA and OSHA standards.
Our water removal and drying process is something special to witness. SERVPRO technicians use safety and containment procedures on the affected area, using negative air flow machines, air movers, dehumidifiers and moisture detection equipment to remove pockets of hidden moisture and get mold growth under control quickly.
We also use an EPA-registered disinfectant to treat all of the affected surfaces, perform any repairs necessary, and pay close attention to restoring the contents and personal belongings of your home to a quality pre-damage condition.
Contact SERVPRO of Northwest Cobb County for additional information or to request services for mold damage mitigation in your home today. (770) 966-1442